background image

3

ENGLISH

_inde

x

Warning! Safety 

Instructions

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT 
REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. 
REFER TO QUALIFIED SERVICE PERSONNEL.

The symbol is intended to alert the user to the presence of 

uninsulated dangerous voltage within the product’s 

enclosure that may be of sufficient magnitude to constitute a risk 
of electric shock to persons.

The symbol is intended to alert the user to the presence of 

important operating and maintenance (servicing) 

instructions in the literature accompanying the device.
WARNING: TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO 
NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.

 

TO PREVENT THE SPREAD OF FIRE, KEEP CANDLES OR OTHER ITEMS 
WITH OPEN FLAMES AWAY FROM THIS PRODUCT AT ALL TIMES.

 

Do not place the TV and/or remote control in the following 

environments:

 

-

Keep the product away from direct sunlight.

 

-

An area with high humidity such as a bathroom.

 

-

Near any heat source such as stoves and other devices that 
produce heat.

 

-

Near kitchen counters or humidifiers where they can easily be 
exposed to steam or oil.

 

-

An area exposed to rain or wind.

 

-

Do not expose to dripping or splashing and do not place objects 
filled with liquids, such as vases, cups, etc. on or over the 
apparatus (e.g., on shelves above the unit).

 

-

Near flammable objects such as gasoline or candles, or expose 
the TV to direct air conditioning.

 

-

Do not install in excessively dusty places. 

Otherwise, this may result in fire, electric shock, combustion/
explosion, malfunction or product deformation.

 

Ventilation

 

-

Install your TV where there is proper ventilation. Do not install in 
a confined space such as a bookcase.

 

-

Do not install the product on a carpet or cushion.

 

-

Do not block or cover the product with cloth or other materials 
while unit is plugged in.

 

Take care not to touch the ventilation openings. When watching 
the TV for a long period, the ventilation openings may become hot.

 

Protect the power cord from physical or mechanical abuse, such as 
being twisted, kinked, pinched, closed in a door, or walked upon. 
Pay particular attention to plugs, wall outlets, and the point where 
the cord exits the device.

 

Do not move the TV whilst the Power cord is plugged in.

 

Do not use a damaged or loosely fitting power cord.

 

Be sure to grasp the plug when unplugging the power cord. Do not 
pull on the power cord to unplug the TV.

 

Do not connect too many devices to the same AC power outlet as 
this could result in fire or electric shock.

 

Disconnecting the Device from the Main Power

 

-

The power plug is the disconnecting device. In case of an 
emergency, the power plug must remain readily accessible.

 

Do not let your children climb or cling onto the TV. Otherwise, the 
TV may fall over, which may cause serious injury.

 

Outdoor Antenna Grounding

 (Can differ by country):

 

-

If an outdoor antenna is installed, follow the precautions below. 
An outdoor antenna system should not be located in the vicinity 
of overhead power lines or other electric light or power circuits, 
or where it can come in contact with such power lines or circuits 
as death or serious injury can occur.
Be sure the antenna system is grounded to provide some 
protection against voltage surges and built-up static charges. 
Section 810 of the National Electrical Code (NEC) in the U.S.A. 
provides information with respect to proper grounding of the 
mast and supporting structure, grounding of the lead-in wire 
to an antenna discharge unit, size of grounding conductors, 
location of antenna discharge unit, connection to grounding 
electrodes and requirements for the grounding electrode. 
Antenna grounding according to the National Electrical Code, 
ANSI/NFPA 70.

Содержание OLED65WXPUA


































Отзывы: