background image

16

ENGLISH

_inde

x

Recommended Measures for 

Preventing Image Retention

 

Avoid watching a video displaying an image as previously listed for 
extended periods of time.

 

Adjust your TV settings as below when turning on a video 
exhibiting an image as previously listed for extended periods of 
time.

 

-

 

→ 

 

 [Picture] 

 [Picture Mode Settings] 

 [Picture 

Mode] 

 [APS]

 

-

 

→ 

 

 [Picture] 

 [Picture Mode Settings] 

 [OLED 

LIGHT] 

 Adjust to lower value

 

-

 

→ 

 

 [Picture] 

 [OLED Screen Saver] 

 [Logo 

Luminance Adjustment] 

 [High]

 

Turn off the menu bar of an external device, such as a set-top 
box, to prevent long-term display of the menu bar of such device. 
(Please refer to the manual of the applicable external device for 
instructions.)

 

Adjust the settings as below when watching a video constantly 
showing black bars on the left, right, top or bottom, in order to 
remove the black bars.

 

-

 

→ 

 

 [Picture] 

 [Aspect Ratio Settings] 

 [Aspect 

Ratio] 

 [Vertical Zoom] or [4-Way Zoom]

Information on Functions 

Supporting Image Quality in 

Relation to Temporary Image 

Retention

 

LG OLED TVs provide a feature called Pixel Refresher, which helps to 
prevent temporary image retention.

 

When the accumulated television viewing time reaches 2,000 
hours or more (this is equivalent to watching TV for five hours a 
day over the course of a year), Pixel Refresher will be automatically 
activated once your TV is turned off. When turning off your TV, a 
notice will appear on the screen informing the activation of Pixel 
Refresher. This feature will run for an hour while your TV is turned 
off. A horizontal line may appear at the top or bottom of the screen 
when the process is almost finished.

 

You may also manually activate Pixel Refresher via the TV menu: 

 

→ 

 

 [Picture] 

 [OLED Screen Saver] 

 [Pixel 

Refresher].

 

Whenever you watch your TV for more than four cumulative hours, 
Pixel Refresher will be automatically activated for a few minutes 
once your TV is turned off. (Note: Pixel Refresher will not be 
activated if the power cord of your TV is not plugged in or the main 
power is off.)

Important Information for 

Preventing Image Retention

OLED is a self-emissive technology, which brings many significant 
benefits to image quality and performance. As with any self-emitting 
display, it is possible for users of OLED TVs to experience temporary 
image retention under certain conditions, such as when displaying a 
static image on the screen for a long time. LG OLED TVs incorporate 
dedicated functions that protect the screen from possible image 
retention.
If a static image persists on screen, screen brightness is automatically 
reduced in specific areas of, or across the entire screen. Once the static 
image disappears, screen brightness will automatically return to its 
prior setting. This is not a product malfunction.

Examples of Images that may Cause 

Image Retention

 

Still images or fixed images containing certain information 
that are displayed uninterrupted on the screen, such as channel 
numbers, station logos, program titles, news or movie subtitles, 
and headlines.

 

Fixed menu or icons for video game consoles or broadcasting 
set-top boxes.

 

Black bars shown on the left, right, top, or bottom of the screen, 
such as in images with a 4:3 or 21:9 ratio.

Содержание OLED65WXPUA


































Отзывы: