LG SIGNATURE OLED65W8 Series, Руководство пользователя

Страница: 25 / 59

ENGLISH
7
•
When mounting a TV on the wall, make sure not to install
the TV by hanging the power and signal cables on the
back of the TV.
•
Do not install this product on a wall if it could be exposed
to oil or oil mist. This may damage the product and cause
it to fall.
• Do not apply foreign substances (oils, lubricants, etc.) to
the screw parts when assembling the product. (Doing so
may damage the product.)
• Do not use any unapproved items to ensure the safety and
product life span.
•
Any damage or injuries caused by using unapproved items
are not covered by the warranty.
•
Make sure that the screws are inserted correctly and
fastened securely. (If they are not fastened securely
enough, the TV may tilt forward after being installed.)
Do not use too much force and over tighten the screws;
otherwise screw may be damaged and not tighten
correctly.
•
Make sure that children do not climb on or hang on the TV.
•
Use a platform or cabinet that is strong and large enough
to support the TV securely.
• When installing the product, first check that the wall is
strong enough. Use the anchors and screws provided.
- If you use anchors and screws that are not specified by
the manufacturer, they may not hold the weight of the
product, causing safety issues.
•
Be sure to use the accessory cable provided. Otherwise,
friction between the product and the wall may cause
damage to the connector.
•
When drilling holes into the wall, make sure you use a
drill and drill bit with the specified diameter. Ensure that
you also follow the instructions regarding the depth of
the holes.
- Otherwise, the product may be installed incorrectly and
cause safety issues.
•
Wear safety gloves when installing the product. Do not
use your bare hands.
-
Otherwise, it may cause personal injury.
•
If some parts of the wall mount do not touch the wall after
it is attached, in addition to the other mounting hardware,
add the double sided tape included with the accessories to
stick the mount to the wall.
•
If you want to connect the TV Cable is connected to the
back panel partition, please use the enclosed Punching
guide.
•
If the cable that connects the panel to the Companion Box
(AV box) is to be embedded in the wall, it is recommended
that construction make use of a conduit as shown in
the figure. The conduit must be installed in accordance
with the wall-embedded installment regulations of
each country. It is recommended that a product made of
metallic material with internal dimensions at least 70 mm
wide and 20 mm thick be used.
Panel
Cable
Wall
Conduit
Companion Box
(AV box)