LG SIGNATURE OLED65W7P, Безопасность и справочная информация

Страница: 7 / 52

7
ENGLISH
4 Set the wall mount on the wall by aligning to
the location of the hole. And, set the angle
adjusting part to face upward.
5 Align the wall mounting screw to the hole
and tighten it. Then, fasten the screws at
torque of 45 kgf/cm (39.06 ibf/in) to 60 kgf/
cm (52.08 ibf/in).
Wall mounting
screw
• Check the material of the wall and the thickness
of the finishing.
• Use the Wall mount anchor for wall material of
concrete, light concrete, strong natural stone,
soft natural stone masonry brick and hallow
block that do not crack.
Wall Material Tools Wall Width
Concrete Wall mounting
anchor, Wall
mounting screw,
Drill bit (Ø 3 /
6 / 8)
45 mm
(1.7 inches)
Brick
Natural stone
Metal Panel
Plywood
Wall mounting
screw, Drill bit
(Ø 3 / 6 / 8)
30 mm
(1.1 inches)
EPS Panel Penetrate
the wall
Plasterboard
+ Plywood
30 mm
(1.1 inches)
• Do not mount the device on the walls made
from plasterboard or medium density fiberboard
(MDF). In this case, the anchor and screws must
be inserted into the concrete behind the finish
surface. If there is no concrete on the other side,
then you must first install a separate hanger to
securely install the anchors and screws.
• When installing the product on wall material
not designated, install the product so that each
location can withstand the pull out load of 70
kgf (686 N) and shear load of 100 kgf (980 N) or
above.
• Use the Ø 8 mm (0.3 inches) drill bit for concrete
and hammer (Impact) drill.
• Make sure that children do not climb on or
hang on the TV.
• Use a platform or cabinet that is strong and
large enough to support the TV securely.
• When installing the product, first check that
the wall is strong enough. Use the anchors
and screws provided.
- If you use anchors and screws that are not
specified by the manufacturer, they may
not hold the weight of the product, causing
safety issues.
• Be sure to use the accessory cable provided.
Otherwise, friction between the product and
the wall may cause damage to the connector.
• When drilling holes into the wall, make sure
you use a drill and drill bit with the specified
diameter. Ensure that you also follow the
instructions regarding the depth of the holes.
- Otherwise, the product may be installed
incorrectly and cause safety issues.
• Wear safety gloves when installing the
product. Do not use your bare hands.
- Otherwise, it may cause personal injury.
• If some parts of the wall mount do not touch
the wall after it is attached, in addition to the
other mounting hardware, add the double
sided tape included with the accessories to
stick the mount to the wall.
• If you want to connect the TV Cable is
connected to the back panel partition, please
use the enclosed Punching Guide.