manualshive.com logo in svg

LG-Nortel ARIA SOHO, Описание функций и руководство по эксплуатации

Поделиться
Скачать
LG-Nortel ARIA SOHO Скачать руководство пользователя страница 223

ARIA SOHO Version 1                                                                                                                                  Issue 0.3 
ADMIN Programming Manual 

June, 2006 

 

 

75 

3.8 Toll Table (PGM 224 – 226) 

Toll tables are used for accessing certain toll free calls as well as not allowing certain calls for Stations assigned 
to a particular Station COS. 

 

3.8.1 Toll Exception Table (PGM 224) 

The Allow/Deny Tables are organized into 2 sets of tables to support 2 different toll plans at one installed site. 
Each allow/deny table may contain up to 30 number strings. All bins of allow and deny tables have no default 
entries. Each number string can contain up to 14 entries including any number 0-9, *, #, and ‘Don’t ’Care.’ 

The following rules should be remembered when setting up the Allow/Deny tables: 

 

• 

If the tables have no entries, no restriction is applied. 

• 

If entries are made in only the Allow table, then only those numbers are allowed. 

• 

If entries are made only in the Deny table, then only those numbers are denied. 

• 

If there are entries in both tables, the allow table is searched at first and if the number is found, it is 

allowed. If not found, the deny table is searched and if the number is found, it is denied. If it is not found in 

either table, it is allowed. 

 

In this program mode, the following items can be customized: 

1.  Press the [TRANS/PGM] button 

2. Dial 

224 

3.  Follow the specific Procedure as listed in the Table below. 

 

PGM 224 

DESCRIPTION 

PROCEDURE 

COMMENTS 

Allow Table A 

Used to check whether the 
digits dialed by a COS2 and 
COS4 Station match with the 
allowed toll pass digits. 
NOTE—Allow Table A is only 
used when the COS of the 
dialed Station is COS2 or 4. 

+ FLEX1 + VALUE (refer 
to Allow Table, 
Range=01-30) + Allow 
Number (Max. 14 digits, 
Range=0-9, #, *) + 
[HOLD/SAVE] 

 

Deny Table A 

Used to check whether the 
digits dialed by a COS2 and 
COS4 Station match with the 
denied toll pass digits. 
NOTE—Deny Table A is only 
used when the COS of the 
dialed Station is COS2 or 4. 

+ FLEX2 + VALUE (refer 
to Deny Table, 
Range=01-30) + Deny 
Number (Max. 14 digits, 
Range=0-9, #, *) + 
[HOLD/SAVE] 

 

Содержание ARIA SOHO
















































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды