Specification
PAGE :
REG. DATE : 2021. 07. 05
MODEL NAME :
ETGFFRBU01
REV. NO : 1.0
9 / 16
REV. DATE : 2021. 07. 05
[Restricted]
LG Innotek Confidential : This document is protected by security policies and
laws.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Part 15.21 statement
Any changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate this equipment.
This device must not be co-located or operating in conjunction with any other
antenna or transmitter
RF Exposure
The antenna (or antennas) must be installed so as to maintain at all times a distance
minimum of at least 20 cm between the radiation source (antenna) and any
individual. This device may not be installed or used in conjunction with any other
antenna or transmitter.
Responsible Party – U.S. Contact Information
LG Innotek USA Inc.
2540 N 1stST STE 400 SAN JOSE, CA 95131-1016, USA
TEL. 1-408-890-0844 /
Frequency
Antenna type & Peak gain
2412 ~ 2472 MHz
(WLAN 2.4 GHz)
ANT 1. Antenna type : PCB Printed antenna (Peak Gain : 1.5 dBi)
ANT 2. Antenna type : PCB Printed antenna (Peak Gain : 0.82 dBi)
5180 ~ 5825 MHz
(WLAN 5 GHz)
ANT 1. Antenna type : PCB Printed antenna
: 1.46 dBi(UNII 1) / 1.48 dBi(UNII 2A)/
: 1.47 dBi(UNII 2C)/ 1.50 dBi(UNII 3)
ANT 2. Antenna type : PCB Printed antenna
: 1.47 dBi(UNII 1) / 1.49 dBi(UNII 2A)/
: 1.50 dBi(UNII 2C)/ 1.44 dBi(UNII 3)
