LG-Ericsson LDP-7004 D, Руководство пользователя

Страница: 684 / 686

●
SLT User Guide for iPECS-MG 100/300
Universal Night Answer
When hearing an incoming signal on other phone or
night bell
,
●
Lift handset.
●
Dial UNA Access Code 5 8 7 .
●
You will be connected to an incoming call if it was
programmed as an UNA line.
Returning Call to Host System
If your iPECS system is connected to another system, you
can use this feature to transfer a call back to an
extension on the other system.
(Your installer will tell you need the feature.)
●
While connected to an extension call, press
hook switch.
●
Dial 5 5 1, Flash Command To CO Line Code.
●
Hearing new dial tone from the other system, dial
the extension number on the required system.
●
When the station answers, (See Screened Transfer)
speak or hang up (See Unscreened Transfer) to
transfer the call.
Paging
●
Lift handset.
●
Dial the desired page zone number.
●
Give your message.
●
Hang up to complete paging.
Page Zones
Call all zones : 5 4 9
Call internal zones : 5 4 3
Call all internal zones : 5 4 3 + 00
iPECS-MG 100 : 5 4 3 + 01 ~ 15
iPECS-MG 300 : 5 4 3 + 01 ~ 30
Call all external zones : 5 4 8
Meet Me Paging
When hearing a paging announcement,
●
Dial 5 4 6.
Queuing
If you access a busy line, you may request the system
to place you on hold, until the next line becomes idle.
●
Lift handset.
●
Press hook switch.
●
Dial 5 5 6, the Callback feature code.
●
You will hear confirmation tone when the call is
accepted.
●
Hang up.
Call Park
While connected to an outside call,
●
Lift handset.
●
Press hook switch.
●
Dial parking location(5 4 1)+Parking number (00 ~ 49).
●
Hang up.
●
To retrieve a parked call, dial parking location.
Message Waiting
●
Lift handset.
●
Dial the desired extension number.
●
No reply from a key station or extension busy tone
from a SLT key station.
●
Press hook switch.
●
Dial 5 1 8 , the Message Wait/Call Back code.
●
Hang up.
Call Forward
●
Lift handset.
●
Dial 5 5 4 .
●
Dial the desired call forward number.
1 - Unconditional, 2 - Busy calls
3 - No answer calls, 4 - Busy/no answer calls
●
Dial the station number to forward incoming calls to.
●
Hang up.
●
To cancel Call Forward, lift handset and dial 5 5 4
and # .
For Follow Me call forward
●
Go to the forwarding station and lift handset.
●
Dial 5 5 4 .
●
Dial 0 .
●
Dial the station number that calls are to be
forwarded.
●
Dial the authorization code of forwarded station.
(The authorization code should be registered
before "Follow Me" Call Forward can be set.)
●
Dial the Forward condition.
●
Dial the destination station, station group .
or dial CO access code (9, 8xx, 88xx)
and desired external phone number.
●
Press the hook-switch, receive confirmation tone.
●
Hang up.
Do Not Disturb (DND)
●
Lift handset.
●
Dial 5 1 6 .
●
Place the handset.
To cancel Do Not Disturb,
●
Lift handset.
●
Dial 5 1 7.
●
Hang up.
Broker Call
●
An extension user engaged in an internal or
external call, should briefly press hook switch to
hold a call.
●
The holding party hears music on hold. (If equipped)
●
Dial the second number of another internal or
external call.
●
When the second call is connected, the extension
user may alternate the call between holding
parties by pressing hook switch.
●
Then, you may make a conference by pressing
hook switch twice in 2 seconds.
2
SLT User Guide for iPECS-MG System