5
I
NSTALLING THE
S
WITCH
Before installing the switch, verify that you have all the items listed
under “Package Contents.” Note that the switch can be installed on
any suitably large flat surface or in a standard EIA 19-inch rack.
Package Contents
The EZ Switch 10/100 includes:
•
EZ Switch 10/100 (SMC-EZ1016DT or SMC-EZ1024DT)
•
Four rubber foot pads
•
Rack-mount bracket kit
•
Appropriate AC power cord
•
This User Manual
Selecting a Site
Be sure to follow the site selection guidelines below when choosing a
location:
•
Select a suitable location for the switch:
o
It should be accessible for installing, cabling and
maintaining the switch.
o
The temperature and humidity should be within the
ranges listed in the specifications.
o
The status LEDs should be clearly visible.
o
There should be adequate space (approximately two
inches) on all sides for proper air flow.
•
Make sure twisted-pair cable is always routed away from
power lines, fluorescent lighting fixtures and other sources of
electrical interference such as radios, transmitters, etc.
•
Make sure that a properly grounded power outlet is within
2.44 meters (8 feet) of the switch and is powered from an
independent circuit breaker. As with any equipment, using a
filter or surge suppressor is recommended.
