Installation
ON
OFF
CON
NEC
TION
KIT
2. Connect the charging cables to the ter-
minal block.
a) Remove the terminal cover plate,
which is placed over the terminal
block to protect it.
b) Connect the negative cable (−) to
the left terminal and the positive
cable (+) to the right terminal.
Tighten the hex-socket screws to a
torque of 6 N·m.
c) Place the cover back on top.
3. Push the grommets into the holes.
3.11 Finalizing installation
ON
OFF
CON
NEC
TION
KIT
1. Stuff the smaller grommets left un-
used with an insulating material like
silicone sealant, and then push them
into the remaining holes.
2. Apply silicone sealant or putty around
the cable at each grommet to prevent
foreign materials from entering the
battery pack.
3. Set the switches as described in
on page
26.
4. Start the battery pack as described in
on page 29.
5. Place the top cover. Tighten the four
screws at each corner of the top cover.
24
