Operating Instructions
Owner’s Manual
7
ENGLISH
Signal
receptor
Operation indication lamps
Operating Instructions
Remove the battery cover by pulling it according to
the arrow direction.
Insert new batteries making sure that the (+) and (-)
of battery are installed correctly.
Reattach the cover by sliding it back into position.
: Use 2 AAA(1.5volt) batteries.
Do not use rechargeable batteries.
NOTICE
• The remote control may be stored by mounting it on a
wall.
• To operate the room air conditioner, aim the remote
control at the signal receptor.
Signal Receptor
Receives the signals from the remote control.(Signal receiving sound: two short beeps or one long beep.)
Operation Indication Lamps
On/Off
: Lights up during the system operation.
Sleep Mode
: Lights up during Sleep Mode Auto operation.
Timer
: Lights up during Timer operation.
Defrost Mode
: Lights up during Defrost Mode or Hot
Start operation (Heat pump model only)
: Lights up during outdoor unit operation.
(Cooling model only)
OUT
DOOR
OUTDOOR UNIT
OPERATION
Storage and Tips For Using the Remote Control
Remote Controller
Lights up during Sleep Mode Auto operation.
PLASMA
Plasma
: Lights up during plasma operation (Plasma model only)
88
: Indicates the setting temperature
(Plasma model only)
ON
INDOOR UNIT
OPERATION
:Lights up during indoor unit operation.(Optional)
