LFA TDP 6s Скачать руководство пользователя страница 3 | Manualshive

Страница: 3 / 81

LFA TDP 6s Скачать руководство пользователя страница 3

3

Important Safety Information

READ THIS BEFORE OPERATING MACHINE

Intended Use

The intended use of this machine is to press dry
raw materials into tablet form.
Potential misuse of this machine includes:
•  Applying too much force to the powder.
•  Trying to fill the Die with powder by hand.
•  Inserting Tooling that is too big for the

machine.

• Not properly mounting the machine.
• Using powders that could explode under

pressure.

• Using wet or damp material.

Personal Protection

For personal protection while transporting the
TDP 6s

®

, abide by these actions:

•  Use an engine hoist to lift the machine.
•  Wear steel toe boots to prevent foot injury.
•  Wear heavy duty grip gloves to ensure firm

grasp on machine.

• Wear back support belt to prevent injury if

needed.

For personal protection while operating the
TDP 6s

®

, abide by these actions:

• Avoid wearing loose jewelry to prevent

machine entanglement.

• Contain long hair to prevent machine

entanglement.

•  Wear safety goggles.
•  Wear disposable latex/rubber gloves.
•  Wear a hairnet (food grade products only).
•  Wear a beard net if needed (food grade

products only).

General Hazards

• Be aware of risk of entanglement and pinch

point due to moving parts.

• Do not operate in a wet environment or with

wet hands due to risk of electrical shock or
burn.

• Do not operate if any wires are damaged,

pinched, or frayed due to risk of electrical
shock or burn.

•  Keep out of reach of children.
•  Keep fingers away from all moving parts.
•  Ensure that it is secured to a workbench to

prevent from falling.

• Inspect machine before use.
• Check that nuts and bolts are suitably

tightened.

• Use this machine only for its intended use

as described in this manual.

• Turn off and unplug the machine before

conducting cleaning and maintenance.

• Do not modify the machine in any way.

«
1
2
3
4
5
...
»

Содержание TDP 6s


















































































Отзывы:

Нет отзывов