manualshive.com logo in svg

LFA SACF 25, Руководство пользователя

Поделиться
Скачать
LFA SACF 25 Скачать руководство пользователя страница 26

26

Settings and Adjustment

The SACF 25

®

’s settings can be adjusted. Tuning the machine can help with changing the capsule 

dose and machine operation.

Speed Adjustments

The SACF 25

® 

has three variable frequency drivers (VFDs) for capsule sewing speed, auger speed, 

and capsule fill speed. These adjustments either lower or raise the following: the speed at which 
the capsules are inserted into the plates, the speed the Auger rotates, and the speed that powder 
fills the capsules.

Tools and Materials Needed

•  Disposable latex/rubber gloves (for food grade products and to protect hands from grease)
•  Hairnet and/or beard net (food grade products only)
•  Sterile shoe covers (food grade products only)

Instructions

Note: Wear latex/rubber gloves (and appropriate food grade attire if applicable) during this process.
1. Run the Capsule Sewer and/or Auger for a few seconds to determine the adjustment.
2. Press the arrows to adjust the speeds.

Capsule fill

Auger

Capsule sewing

Note the following:
•  Capsule fill weight is increased as the turntable speed is decreased.
•  Capsule fill weight is increased as the level of powder in the Powder Hopper is increased.
•  Capsule fill rate is increased as the level of powder in the Powder Hopper is increased.

Содержание SACF 25
























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды