3
HARDWARE CONTENTS
(not shown actual size)
SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble, operate or install
the product.
●
Turn off electricity at main fuse box (or circuit breaker box) before beginning installation by
removing fuse (or switching off circuit breaker).
●
Be careful not to damage or cut the wire insulation (covering) during fixture installation. Do not
permit wires to contact any surface having a sharp edge. To do so may damage or cut the wire
insulation, which could cause serious injury or death from electric shock.
CAUTION:
●All electrical connections must be in agreement with local codes, ordinances or the National
Electric Code (NEC)
. Contact your municipal building department to learn about your local codes,
permits and/or inspections.
●Risk of fire
—
most dwellings built before 1985 have supply wire rated for 140
º
F/60
º
C. Consult a
qualified electrician before installation.
●Do not connect this fixture to an electrical system that does not provide a means for equipment
grounding. Never use a fixture in a two-wire system that is not grounded. If you are not sure your
lighting system has a grounding means, do not attempt to install this fixture. Contact a qualified,
licensed electrician for information with regards to proper grounding methods as required by the
local electrical code in your area.
●If a dimmer control switch is used with this fixture, obtain professional advice to determine the
correct type and electrical rating required.
AA
BB
CC
Mounting Bracket
Qty. 1
DD
Cap Nut
Qty. 3
EE
FF
F
Washer
Qty. 3
Wire Nut
Qty. 3
GG
Thumbscrew
Qty. 2
Anchor Bolt
Qty. 3
Wrench
Qty. 1
WARNING:
