ASSEMBLY INSTRUCTIONS
Fig. 1
Hardware Used
Note: During each step of assembly, assemble
all hardware and hand tighten. Once all the
hardware is installed for that particular step,
tighten all the hardware.
1. Attach the front axle assembly (H) to the
front frame (F) using four M8 x 20mm
carriage bolts (DD), four M8 lock nuts (JJ),
and four M8 washers (GG).
Attach the outer ends of the steering linkage
using two M6 x 20mm shoulder bolts (FF),
M6 lock nuts (LL), and M6 washers (MM),
as shown in Fig. 1.
Hand tighten all bolts until after Step 2.
F
H
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with
package contents list and diagram above. If any part is missing or damaged, do not attempt to
assemble the product. Contact customer service for replacement parts.
Estimated Assembly Time: 30 minutes
Tools Required for Assembly:
Flathead screwdriver, Phillips screwdriver and socket set
(or two adjustable wrenches)
.
(tools not included)
4
DD
DD
x 4
M8 Flat
Washer
JJ
JJ
M8 Lock Nut
x 4
M8 x 20mm
Carriage Bolt
x 4
LL
LL
M6 Lock Nut
x 2
MM
MM
M6 Flat Washer
x 2
GG
GG
x 2
M6 x 20
Shoulder Bolt
FF
FF
