LEYRO LCA 30, Руководство пользователя

Страница: 23 / 36

ADVANCED MICRO CALIBRATION BATH TEMPERATURE
LCA 30/50
www.leyroinstruments.com 21
Service
This option allows calibrating the 0 Ohm in the internal and external PT100 . Before doing it
consult previously with Leyro Instruments.
Personalize
- Home screen customization: you can choose between top, center or bottom, within them
you can choose up to four pages and within the latter up to four blocks.
- Personalization of menu: with this option the desired color of the navigation menu will be
chosen.
Help
- About it: in this option we will observe the internal characteristics of the equipment.
- Plug-in modules: represents the number of cards that the equipment has.
- Installed functions: represents the installed software.
-
Enable: this function allows us to take screenshots. Screenshots can only be made if a
USB device is connected. You can only capture the trend graphs by clicking on the graph
the upper
right key (key with 3 points vertically) and press the camera icon.
8. Profiles
In the main screen there is a direct access to the programming of the profiles, called profile actions. Once clicked
we will have different options:
-
Run last:
This option will execute the last selected profile.
-
Run profile:
Press this key and select the necessary profile by pressing actions and within this menu
you can choose:

Run profile: Used to start a profile.
When a profile is executed you can press profile actions again and:
- Pause: to pause the profile.

Resume: This option is used to restart the profile, but only will be active
when pause is pressed.
- Finish: to finalize the profile.

Custom Run: Allows you to select the step from which you need to start the profile.

View/edit steps: In this option you can modify the steps used by the profile.
The variables named with number 2 can only be modified in the equipment with the
external probe option.
First:

Modify the step that is added by default, by pressing Soak and changing it to
Instant Change .

Once this is done, modify the value of Instant Change in the Target Set Point
Loop 1 and Target Set Point Loop 2 to necessary. The value should be the same
in the two.

The Guaranteed Soak Enable 1 and Guaranteed Soak Enable 2 must be disabled.

At the same time, the waiting time must be left in 0 hours 0 minutes 0 seconds.

Then, press Done .

If you have modified the value, but want to change it, press Actions and Edit Step
Parameters .

If you want to delete a step, click on Actions and Delete Step .