LEYBOLD 960702FP, Оригинальная инструкция по эксплуатации

Страница: 4 / 40

4
300419816_002_C1 - 11/2016 - © Leybold
Safety Information
0 Important Safety Information
0.1 Mechanical Hazards
1 Never expose part of the body to the vacuum. There is a danger of
injury. Never operate the pump with an open and thus accessible in-
let. Vacuum connections as well as oil filling and oil draining open-
ings must not be opened during operation of the pump.
0.2 Electrical Hazards
1 The electrical connection must only be provided by a trained person.
Please observe the national regulations in the country of use like EN
50110-1 for Europe, for example.
2 Disconnect the unit from the power supply before starting any work.
0.3 Thermal Hazards
1 When operating pump is hot and some surfaces could reach a tem-
perature higher than 80 °C (176 °F). There is a risk of burn by touch-
ing.
0.4 Hazards Caused by Materials and Substances
1 SOGEVAC
®
pumps are not designed:
■
for pumping of dusty, aggressive, corrosive, flammable or explosive
gases or gases mixtures;
■
for pumping of oxygen or other highly reactive gases with a greater
concentration than atmospheric concentration (>20%);
■
for pumping liquids;
■
for working in flammable, explosive or dusty environment.
In case of doubt, please contact Leybold.
See also the limits of use indicated in the CE declaration of conformity.
2 Depending on the process involved, dangerous substances and oil
may escape from the pump. Take the necessary safety precautions!
3 Take appropriate precautions to insure that the pump cannot start.
4
If the pump has pumped hazardous gases it will be absolutely neces-
sary to determine the nature of the hazard involved and take the ap-
propriate safety precautions.
5
Observe all safety regulations!
6
Take adequate safety precautions prior to opening the intake or ex-
haust port.
7 Respect the instructions concerning environment protection when dis-
carding used oil or exhaust filters!
WARNING
DANGER
CAUTION
DANGER