Leybold vacuum PhoeniXL300, Техническое руководство

Страница: 56 / 102

Menu
56
⏐
GA10.218_1.01 - 11/2004
6.4 Trigger & Alarms
• Main Menu > Trigger & Alarms
The trigger levels, the volume of the loudspeaker and the units of leak
rates and pressures can be set in this menu
Fig. 20 .
6.4.1 Trigger Level 1
• Main Menu > Trigger & Alarms > Trigger Level 1
The value of the first trigger level can be set. See Chapter 4.1.2.7 Numeri-
cal Entries for the description of the entry.
Trigger 1, 2 and Trigger 3 are programmable switching thresholds. When
these thresholds will be exceeded the Phoenix reacts as follows:
Display In the status line of the display the signs for Trigger 1, 2 and Trigger 3 are
displayed inverted if the leak rate exceeds (becomes higher than) the pro-
grammed value.
Relay Output The trigger-relais of the digital out switches. Please refer to Chapter
2.2.2.2 , Digital out, for further details.
Alarm/Loudspeaker Additionally Trigger level 1 defines at which level the various alarm types
react (See Chapter
6.4.7 , Audio alarm type )
Fig. 20 The Trigger & Alarms Menu
Key No. Name Description
1 Back Return to the main menu.
2 Trigger Level 1 Definition of Trigger level 1. Chapter 6.4.1
3 Trigger Level 2 Definition of Trigger level 2. Chapter 6.4.2
4 Trigger Level 3 Definition of Trigger level 2. Chapter 6.4.3
5 Units Selection of leak rate and pressure units.
Refer to Chapter
6.4.4
6 Volume Refer to Chapter 6.4.5
7 Alarm delay Refer to Chapter 6.4.6
8 Audio alarm type Choice of different alarm types. Refer to
Chapter
6.4.7