Leyard TWF Series, Руководство пользователя, Страница: 19 / 76

~ 14 ~
User Manual for TWF Series LED Unit
XY four-axis adjustment mechanism
2.
Structure Adjustment of Display Unit
Once Layers A and B layer, as a integrated display unit component, are completely installed, Layer B will
be locked with Layer C and Layer D. In the subsequent maintenance, it only needs to remove the LED
display unit in Layer A.
Use a special magnet tool to make the forward and backward adjustment at the four Z-axis screws of the
display unit (see the figure below), based on the adjustment range of -5-5 mm.
3.
Assembly and Removal of Display Unit
Operation steps for removal of display unit
1. Screw off the Z-axis screws at the four corners using a magnet tool;
2. Pull them out horizontally;
3. Lift the display unit;
4. Disconnect the connecting wire.
To assemble the display unit, follow the reverse steps relative to those listed above.
Z-axis adjustment and disassembly order of display unit