Audio Output:
You can also define any audio output port as the output of sub-picture audio. In this
case, the audio output port(s) is switched to output audio from the “audio source of sub-
picture” rather than audio from the “audio source of normal processing”
The audio output from the sub-picture audio source has no delay
This feature is available only in firmware version 2.00 or later
PIP/PBP and Secondary Passthru share the video input source. Therefore, when you set
PIP/PBP to ON, it is better to turn Secondary Passthru to OFF. Otherwise the video input
source of Secondary Passthru will be taken over by PIP/PBP as the video input source of
the sub-picture
When the
action button is pressed, the OSD turns to the following page:
Use the
Left/Right
arrow remote control keys to adjust the sliders
Use the
Up/Down
arrow remote control keys to select between different sub-picture
adjustment options
When
OK
is pressed on the remote control, the whole OSD is hidden and only the slider
control is shown at the lower left corner of the display
Pressing
Back
on the remote control will return you to the full OSD, or simply press the
Menu
key to exit from OSD mode
You can select a different color as the frame of the main picture and/or sub-picture. The
default is no frame
75