LEXUS
NX 200t/300h
2015 -
CROSS BARS
Procedure
Page 2 of 10 pages
Issue: C 01/05/2016
Care must be taken when installing this accessory to ensure damage does not occur to the vehicle. The installation of this
accessory should follow approved guidelines to ensure a quality installation.
These guidelines can be found in the "Accessory Installation Practices" document.
This document covers such items as:-
Vehicle Protection (use of covers and blankets, cleaning chemicals, etc.).
Safety (eye protection, rechecking torque procedure, etc.).
Vehicle Disassembly/Reassembly (panel removal, part storage, etc.).
Electrical Component Disassembly/Reassembly (battery disconnection, connector removal, etc.).
Please see your Lexus dealer for a copy of this document.
1.
Prepare for Installation.
(a)
Verify the kit contents (Fig. 1-1).
(1)
A = Front cross bar
(2)
B = Rear cross bar
(3)
C = Cross bar rubber trim (2 pcs)
(4)
D = Keys (4 pcs)
(5)
E = 3-hole 3M film (2 pcs)
(6)
F = 2-hole 3M film (2 pcs)
Fig. 1-1
