39
Accelerate or decelerate, with accel-
erator pedal operation, to the desired
vehicle speed (above approximately
30 mph [50 km/h]) and push the lever
down to set the speed.
Cruise control “SET” indicator will
come on.
The vehicle speed at the moment the
lever is released becomes the set
speed.
While the vehicle is in vehicle-to-
vehicle distance control mode, if the
lever is released when vehicle speed
is less than 30 mph (50 km/h) and a
vehicle ahead can be detected, the
vehicle will start following the vehicle
ahead at a set speed of 30 mph
(50 km/h).
■
Adjusting the set speed
Increases the speed
(Except when the vehicle has been
stopped by system control in vehicle-
to-vehicle distance control mode)
Decreases the speed
Fine adjustment: Momentarily move the
lever in the desired direction.
Large adjustment: Hold the lever in the
desired direction.
2
1
2
Содержание NX 200t 2016
Страница 105: ...105 Memo...