Before loading, ensure that the transmission is in “Neutral” and the ignition switch is in
position to unlock the steering (operation of the keyless ignition switch is covered on
page 13 of this guide). When loading, remember that the eye bolt is designed for a
straight ahead pull within a 20 degree window, so stop the vehicle as the winch wire rope
begins to pull downward. To prevent too much downward pull you will need to keep the
leading edge of the vehicle about 3 feet from the winch drum
Once loaded, set the parking brake and secure the vehicle onto the carrier.
NOTE:
Lexus states that the four tie-downs slots in the frame can be used to secure the
vehicle. Slots are provided in the frame to take either “T” or “mini-J” type hooks (See
Figure 3). AAA recommends the use of wheel strap style tie-downs around each wheel
as a means of securing the vehicle to the car carrier while reducing the risk of damaging
under-body and suspension components.
(Front tie down slot) (Rear tie down slot)
Figure 3
After securing, return the bed to the transporting position, then slacken the winch wire
rope slightly to prevent downward pull on the eye bolt as bumps are encountered during
transport. Make sure that the ignition switch is turned to the OFF position to avoid
unnecessary battery drain.
Caution!
This vehicle may be equipped with front carbon fiber brakes and specialized calipers
which are extremely costly. Operators should be extremely careful to avoid damage to
these components.
7
