HomeLink
®
GARAGE DOOR OPENER
Check the HomeLink
®
garage door opener by pressing each
of the three buttons and observing that the indicator light
illuminates. Final operational check requires programming.
Indicator light
Buttons
SAFETY CONNECT
®
Inspect the Safety Connect LED, (located in the overhead
console) for a green activation status indicator. If green
LED is not illuminated, press the SOS button once, wait for
voice prompt, and press the button again within 5 seconds.
If successful, tones will be heard followed by voice prompt
saying “Activation is complete - Good bye”. Green light
will change from off to green after call has ended. If the
green light does not illuminate, please refer to TIS for
troubleshooting procedures.
Microphone
Light indicator
“SOS” Button
NOTE:
Vehicles may arrive with hanger requesting inspection to
Safety Connect system. If system is working properly and
green light is illuminated, disregard hanger.
1
2
1
2
3
42
GX 460
INSPECTION DETAILS - C. LEFT FRONT
Содержание GX 460 2014
Страница 2: ...2014MY GX 460 Pre Delivery Service Manual ...
Страница 10: ...INSPECTION DETAILS 7 GX 460 ...
Страница 34: ... THIS PAGE INTENTIONALLY LEFT BLANK 31 GX 460 INSPECTION DETAILS C LEFT FRONT ...
Страница 70: ...COMPLETION 67 GX 460 COMPLETION ...