WINDSHIELD WIPERS AND WASHER
With the “POWER” switch in the “ON” mode:
a ) Push the lever toward you and check that washer fluid
squirts onto the proper area of the windshield and that
wipers are activated. Wipers will make one additional
pass after a 3-second delay.
b ) Check wiper speed operation on mist, intermittent, low
and high cycles. Check that the wiper blades wipe off
the washer fluid cleanly.
c ) The wipers should not make any abnormal noise when
operating.
NOTE:
• Intermittent Type --- The frequency of the intermittent
can be adjusted by turning the knob.
• Rain-sensing Type --- The sensitivity of the sensor
can be adjusted by turning the knob.
• Add washer fluid up to the proper level.
Rain-sensing Type
d ) With the wiper switch lever in the “AUTO” position,
splash the water on the windshield around the
windshield sensor and check that the wipers operate
.
Intermittent Type
Rain-sensing Type
18
GS350/GS450h
INSPECTION DETAILS - C. LEFT FRONT
Содержание GS 350 2014
Страница 2: ...2014MY GS350 GS450h Pre Delivery Service Manual GS350 GS450h ...
Страница 13: ...INSPECTION DETAILS ...
Страница 71: ...COMPLETION 58 GS350 GS450h COMPLETION ...
Страница 74: ...MAINTENANCE FOR HV AUXILIARY BATTERY BEFORE DELIVERY Refer to the Service Bulletin 61 GS350 GS450h COMPLETION ...