Lexus 2003 SC430, Руководство пользователя

Страница: 43 / 380

SWITCHES
26
WINDSHIELD WIPER AND WASHER
SWITCHES
12L120a
1 Interval adjuster 2 Washer on
To turn the wipers on, move the lever down until you reach
the desired speed setting.
The ignition switch must be in the ”ON” position.
There are 3 settings:
”INT” position: Intermittent operation
”LO” position: Low speed operation
”HI” position: High speed operation
Twist the interval adjuster upward to increase the wiping
time interval between sweeps, and downward to decrease
it.
The wiper lever must be in the ”INT” position.
The time interval between sweeps is shortened when the
vehicle speed increases. When the vehicle speed reaches
more than about 20 km/h (12 mph) with the interval adjuster in
”F” position, the time interval becomes the shortest 1.5
seconds.
If you stop the vehicle with the wiper switch in the ”LO” position,
the wiper speed automatically changes from low speed to
intermittent operation speed.* This function does not work
when the interval adjuster is in the ”F” position.
NOTE: *This feature can be deactivated. Ask your Lexus
dealer for details.
For mist wiper operations (a single wipe), pull the lever
toward you and release it.
To make the washer squirt, push the button on the end of
the lever.
If the wiper lever is in the ”OFF” position, the wipers will
automatically make 3 wipes and then a single wipe later to
sweep the windshield completely.* The interval between the
3 wipes and the last wipe will depend on the vehicle speed.
The last sweep does not happen if the vehicle speed exceeds
about 170 km/h (106 mph).
NOTE: *The last single wipe can be deactivated. Ask your
Lexus dealer for details.
The low washer warning light in the instrument cluster comes
on when the fluid level in the tank becomes very low. For
information on adding washer fluid, see ”Adding washer fluid”
on page 343.