Fax partition inoperative. Contact system administrator.
Try one or more of the following:
•
From the printer control panel, touch
Continue
to clear the message.
•
Turn off the printer, and then turn it back on. If the message appears again, then contact your system
support person.
Fax server 'To Format' not set up. Contact system administrator.
Try one or more of the following:
•
From the printer control panel, touch
Continue
to clear the message.
•
Complete the Fax Server setup. If the message appears again, then contact your system support
person.
Fax Station Name not set up. Contact system administrator.
Try either of the following:
•
From the printer control panel, touch
Continue
to clear the message.
•
Complete the Analog Fax setup. If the message appears again after completing the setup, then contact
your system support person.
Fax Station Number not set up. Contact system administrator.
Try one or more of the following:
•
From the printer control panel, touch
Continue
to clear the message.
•
Complete the Analog Fax setup. If the message appears again after completing the setup, then contact
your system support person.
Imaging unit low [84.xy]
You may need to order a replacement imaging unit. If necessary, select
Continue
on the printer control
panel to clear the message and continue printing.
Imaging unit nearly low [84.xy]
If necessary, touch
Continue
on the printer control panel to clear the message and continue printing.
Imaging unit very low, [x] estimated pages remain [84.xy]
You may need to replace the imaging unit very soon. For more information, see the “Replacing supplies”
section of the
User’s Guide
.
If necessary, touch
Continue
on the printer control panel to clear the message and continue printing.
Troubleshooting
270
