3
Flex, fan, and align the paper edges before loading.
4
Load the paper stack with the printable side facedown, and
then make sure that the side guides fit snugly against the
paper.
•
Do not slide paper into the tray.
•
To avoid paper jams, make sure that the stack height is
below the maximum paper fill indicator.
•
Load letterhead depending on whether an optional staple
finisher is installed or not.
Without an optional staple
finisher
With an optional staple finisher
One
‑
sided printing
One
‑
sided printing
Without an optional staple
finisher
With an optional staple finisher
Two
‑
sided printing
Two
‑
sided printing
•
When loading prepunched paper, make sure that the holes
on the long edge of the paper are against the right side of
the tray.
One
‑
sided printing
Two
‑
sided printing
•
Load envelopes with the flap side up and against the left
side of the tray.
Warning—Potential Damage:
Do not use envelopes with
stamps, clasps, snaps, windows, coated linings, or
self
‑
stick adhesives.
5
Insert the tray.
6
From the control panel, set the paper size and paper type to
match the paper loaded.
10
