Lexmark XC8155, Руководство по обслуживанию

Страница: 542 / 1568

MSHPF hole punch box error service check
Action Yes No
Step 1
a
Check the MSHPF for proper installation, and then check its
paper path. See
“Procedure before starting the MSHPF
service checks” on page 256 .
b
Enter the Diagnostics menu, select Output bin quick feed >
select bin, and then touch Single or Continuous .
Does the problem remain?
Go to step 2. The problem is
solved.
Step 2
a
Empty the hole punch box, and then remove the obstructions
along the sensor path holes.
b
Check the box for misalignment and damage.
Is the box properly installed and free of damage?
Go to step 3. Go to step 4.
Step 3
Turn the hole punch box gear and check if the auger rotates.
Does the auger rotate?
Go to step 5. Go to step 4.
Step 4
Reinstall or replace the hole punch box.
Does the problem remain?
Go to step 5. The problem is
solved.
Step 5
a
Enter the Diagnostics menu, and then navigate to:
Output device diagnostics > Sensor tests > Finisher
b
Find the sensor (Hole punch box full).
Does the sensor status change while toggling the sensor?
Go to step 8. Go to step 6.
Step 6
Reseat the sensor cable, and then check the sensor for
misalignment and damage.
Is the sensor properly installed and free of damage?
Go to step 8. Go to step 7.
Step 7
Reinstall or replace the sensor. See “Sensor (hole punch box full,
receiver) removal” on page 1038 and “Sensor (hole punch box
full, transmitter) removal” on page 1043 .
Does the problem remain?
Go to step 8. The problem is
solved.
7564
Diagnostic information
542