Lexmark X792 7562-4xx, Руководство по обслуживанию

Страница: 268 / 855

3-30
Service Manual
7562
Go Back
Previous
Next
Exiting the Configuration Menu
Select EXIT Config Menu to exit the Configuration Menu and return to normal mode.
Reset Separator Roll and Pick Assembly Counter
Use this setting to reset the value of the separator roll and pick assembly maintenance counter to zero (0) after
you replace them.
USB Scan to Local
When set to Off, this setting tells the USB device driver to enumerate as a USB Simple device. When this is set
to on, USB device driver enumerates as a USB Composite device (multiple interfaces).
Black Only Mode
When this setting is set to On the printer prints only grayscale printing. The default is Off. The result is similar to
setting Print Mode to Black Only.
Note: This setting appears only when the PJL Password Environment variable is set to 0.
Print Quality Pages
The Print Quality Test consists of five pages. Pages one and two contain a mixture of graphics and text. The
remainder of the pages only contain graphics. Use this test to identify print quality problems. The Test Pages
must be printed on A4, Legal, or Letter paper.
Go to “Print tests” on appendix page A-1 for representative samples of the pages.
ADF Edge Erase See “ADF Edge Erase” on page 3-33 .
FB Edge Erase See “FB Edge Erase” on page 3-33 .
Scanner Manual
Registration See “Scanner Manual Registration” on page 3-33 .
Disable Scanner See “Disable Scanner” on page 3-33 .
Paper Prompts See “Paper Prompts” on page 3-33 .
Envelope Prompts See “Envelope Prompts” on page 3-34 .
Action for Prompts See “Action for Prompts” on page 3-34 .
Jobs On Disk See “Jobs On Disk” on page 3-34 .
Disk Encryption See “Disk Encryption” on page 3-34 .
Wipe Disk See “Wipe Disk” on page 3-34 .
Font Sharpening See “Font Sharpening” on page 3-34 .
Require Standby See “Require Standby” on page 3-34 .
UI Automation See “UI Automation” on page 3-35 .
Key Repeat Initial
Delay See “Key Repeat Initial Delay” on page 3-35 .
Key Repeat Rate See “Key Repeat Rate” on page 3-35 .
Clear Custom Status See “Clear Custom Status” on page 3-35 .
USB Speed See “USB Speed” on page 3-35 .
Exit Config Menu
Configuration Menu