4
Open the control panel cover to access layer 2.
Power
Set TOF
LineFeed
Macro
Setup
Pitch
1
0
15
17
2
0
2
4
1
2
3
4
Micro
Micro
12
Lock
5
Press any paper movement button (
Micro
,
Micro
,
LineFeed
) to align the horizontal lines located on the platen
with the Top
‑
Of
‑
Form you want.
Note:
If you press and hold a paper movement button, the paper will advance in micro movements and then go
into continuous feed mode.
6
Press
Set TOF
to set and save your Top
‑
Of
‑
Form.
7
Close the control panel cover.
8
Press
Start/Stop
to put the printer online.
Setting Top
‑
Of
‑
Form in a macro
Each macro has a separate Top
‑
Of
‑
Form setting. To set Top
‑
Of
‑
Form in a macro, you must first select that macro.
1
Open the control panel cover to access layer 2.
2
Press
Macro
to select the macro you want to use.
Note:
The procedure for setting Top
‑
Of
‑
Form depends on the paper and print mode you are using. For help, see
one of the following sections in this chapter:
•
“Setting Top
‑
Of
‑
Form for continuous forms in push mode” on page 40
•
“Setting Top
‑
Of
‑
Form for continuous forms in pull mode” on page 41
•
“Setting Top
‑
Of
‑
Form for a cut form or an envelope” on page 41
Loading paper
42
