To install a filter for the printer:
1
Connect the line port of the DSL filter to the wall jack.
2
Connect a telephone cable from the port on the back of the printer to the phone port on the DSL
filter.
3
To continue using a computer for Internet access, connect the computer to the DSL HPN port on the
DSL filter.
4
To connect a telephone to the printer, remove the protective plug from the
port of the printer
and then connect the telephone to the port.
Scenario 3: VoIP telephone service
To connect:
1
Connect one end of a telephone cable to the port of the printer.
2
Connect the other end of the cable to the port labeled
Phone Line 1
or
Phone Port
on the VoIP adapter.
The port labeled
Phone Line 2
or
Fax Port
is not always active. You may need to pay extra to your VoIP
provider if you want to activate the second phone port.
3
Remove the protective plug from the
port of the printer, and then connect the telephone to the
port.
Tips for this setup:
•
To make sure that the phone port on the VoIP adapter is active, plug an analog telephone into the
phone port, and then listen for a dial tone. If you hear a dial tone, then the port is active.
•
If you need two phone ports for your devices but do not want to pay extra, then do not plug the printer
into the second phone port. You can use a phone splitter. Plug the phone splitter into the
Phone Line
1
or
Phone Port
, and then plug the printer and telephone into the splitter.
Make sure you use a phone splitter,
not
a line splitter. To make sure that you are using the correct
splitter, plug an analog telephone into the splitter and then listen for a dial tone.
Setting up the printer to fax
34
