Lexmark Optra S 4059 Series, Руководство по обслуживанию

Страница: 130 / 347

2-103
4059 Service Manual
4059-XXX
Service Tip: An intermittent “32-Unsupported Cartridge” User Error
Message can be caused by poor contact between the smart
cartridge contacts in the upper front cover and the smart chip. Also
check for proper seating of the smart cartridge cable to the engine
board.
FRU Action
1 Smart Cartridge Contact
Smart Cartridge Ground
Contact Check both contacts to make sure
they are properly installed and the
two contacts are not touching each
other. Check both contacts for any
signs of being bent, worn or broken.
If incorrect replace both contacts.
2 Smart Cartridge Cover Check to make sure that the smart
cartridge cover is properly snapped
into place and is not damaged or
broken. Replace as necessary.
3 Smart Cartridge Plunger Check the plunger for correct
installation and any signs of being
damaged or broken. Correct any
problem found or replace the plunger
as necessary.
4 Smart Cartridge Cable
Engine Board Check the voltage on the smart
cartridge contact. The voltage
measures approxi5 V dc
when not writing data to the engine
board. If data is being written, the
voltage measures approximately
+12 V dc. If incorrect, disconnect the
cable from J21 on the engine board
and check the voltage on J21-1. The
voltage measures approximately
+5 V dc. If incorrect, replace the
engine board. If correct, replace the
smart cartridge cable.