Interfaces
8-3
11
Click OK.
12
Close all windows now that the port is set up.
Setting Up the Communications Port Using Windows NT 4.0
In your Windows NT 4.0 application:
1
On the Menu bar, click Start.
2
Click Settings.
3
Click Control Panel. The Control Panel screen displays.
4
Double-click the Ports icon. The Ports screen displays.
5
Select the communications port you want to configure.
6
Click the Settings button.
The Settings screen for this specific port displays. For example, if you select the
COM1 port, then the Settings for COM1 screen displays.
7
Fill out the fields for the following printer settings to make them match your
printer settings:
•
Baud Rate
•
Parity
•
Stop bits
•
Flow Control
Note:
For Flow Control, select Hardware if you want DTR protocol or Xon/
Xoff for Xon/Xoff protocol.
8
Click OK.
9
Close all screens now that the port is set up.