Lexmark M3250 Скачать руководство пользователя страница 179 | Manualshive

Страница: 179 / 187

background image

Federal Communications Commission (FCC) compliance information

statement

This product has been tested and found to comply with the limits for a Class A digital device, pursuant to Part
15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received, including interference that may cause
undesired operation.

The FCC Class A limits are designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful
interference, in which case the user will be required to correct the interference at his own expense.

The manufacturer is not responsible for any radio or television interference caused by using other than
recommended cables or by unauthorized changes or modiﬁcations to this equipment. Unauthorized changes
or modiﬁcations could void the user's authority to operate this equipment.

Note:

To assure compliance with FCC regulations on electromagnetic interference for a Class A computing

device, use a properly shielded and grounded cable such as Lexmark part number 1021231 for parallel attach
or 1021294 for USB attach. Use of a substitute cable not properly shielded and grounded may result in a
violation of FCC regulations.

Any questions regarding this compliance information statement should be directed to:

Director of Lexmark Technology & Services
Lexmark International, Inc.
740 West New Circle Road
Lexington, KY 40550
Telephone: (859) 232–3000
E-mail: [email protected]

Industry Canada compliance statement

This Class A digital apparatus meets all requirements of the Canadian Interference-Causing Equipment
Standard ICES-003.

Avis de conformité aux normes de l’industrie du Canada

Cet appareil numérique de classe A est conforme aux exigences de la norme canadienne relative aux
équipements pouvant causer des interférences NMB-003.

Notice to users of Class A products in Brazil

Este produto não é apropriado para uso em ambientes domésticos, pois poderá causar interferências
eletromagnéticas que obrigam o usuário a tomar medidas necessárias para minimizar estas interferências.

European Community (EC) directives conformity

This product is in conformity with the protection requirements of EC Council directives 2014/30/EU, 2014/35/EU,
and 2011/65/EU on the approximation and harmonization of the laws of the Member States relating to

Notices

179

«
...
177
178
179
180
181
...
»

Содержание M3250




























































































































































































Отзывы:

Нет отзывов

Похожие инструкции для M3250

Бренд: Ier Страницы: 8

Бренд: Xerox Страницы: 25

Бренд: Canon Страницы: 37

Бренд: Oki Страницы: 126

Executive Series 3037

Бренд: Oki Страницы: 546

Duplicator 7 Plus

Бренд: WANHAO Страницы: 28

4650NX - SuperScript Color Laser Printer

Бренд: NEC Страницы: 74

Aficio SP 320 Series

Бренд: Ricoh Страницы: 272

Бренд: Xerox Страницы: 240

Бренд: Ricoh Страницы: 70

Бренд: Boley Страницы: 20

Бренд: Loadrite Страницы: 16

Бренд: Epson Страницы: 61

Бренд: Epson Страницы: 4

Бренд: Epson Страницы: 4

Бренд: Epson Страницы: 5

Бренд: Epson Страницы: 4

Бренд: Epson Страницы: 4

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды