Lexmark M124x Скачать руководство пользователя страница 106

Страница: 106 / 318

Mismatched supplies error service check

Action

Yes

Step 1

Check whether the supplies installed are genuine.

Are the supplies genuine and supported Lexmark units?

Go to step 3.

Go to step 2.

Step 2

Install genuine and supported Lexmark units.

Does the problem remain?

Go to step 3.

The problem is
solved.

Step 3

Check the following:

•

Check if the supplies have matching types. Do not install MICR
supplies together with non

‑

MICR supplies.

•

Check if the supply is supported by the region.

•

Check if the supply is supported by the speciﬁc printer model.

Is the affected supply the correct or matching unit?

Contact the next
level of support.

Go to step 4.

Step 4

Replace the affected supply with the correct unit.

Does the problem remain?

Contact the next
level of support.

The problem is
solved.

Maintenance kit low service check

Action

Yes

Step 1

Print a test page using paper from a newly opened package, and
then check the result.

Are there print quality defects on the test page?

Go to step 2.

Go to step 3.

Step 2

Identify, and then resolve the print quality defect. See

“Fixing print

quality issues” on page 25

Note:

If a supply was replaced, then make sure that the

maintenance kit count is reset.

Does the problem remain?

Go to step 3.

The problem is
solved.

Step 3

Check if the printer has feed problems by doing a feed test.

Does the printer have a problem feeding during the test?

Go to step 4.

Go to step 5.

4600-830, -835, -895

Diagnostics and troubleshooting

106

Содержание M124x































































































































































































































































































































Результаты поиска

Содержание M124x

Отзывы:

Похожие инструкции для M124x

Бренды по названию

Популярные бренды

Lexmark M124x, Руководство по обслуживанию

Результаты поиска

Содержание M124x

Отзывы:

Похожие инструкции для M124x

Бренды по названию

Популярные бренды