AppleTalk and MarkNet print servers
Print materials
Supplies
Troubleshooting
Administration
7
Printing
www.lexmark.com
Lexmark J110
Troubleshooting
If you need additional help setting up the MarkNet print server to work with AppleTalk, try the
following resolutions.
Common solutions to network problems
1
Make sure the AppleTalk protocol is turned on (activated) in the print server. To find
out, print a network setup page and look under AppleTalk.
2
Make sure the status of the MarkNet print server is “connected”. To find out, look on
the network setup page for Status.
3
Do you see the printer in the Chooser? If not, restart the Macintosh workstation and
look again.
Note: Be aware that if you’re on a non-routed network, you can only see the printer if
your workstation connection (LocalTalk, Ethernet or Token-Ring) matches the
connection on the printer. For example, if the Macintosh workstation is on
LocalTalk, you cannot see a printer on Ethernet unless there is a router on the
network.
4
If you still don’t see the printer in the Chooser, make sure AppleTalk is active on the
workstation (look in the AppleTalk control panel).
