Lexmark Infoprint 1332, Руководство пользователя

Страница: 70 / 332

2-34
Service Manual
Infoprint 1332/1352/1372
Power-On Self Test (POST)
When you turn the printer on, it performs a Power-On Self Test. Check for correct POST functioning
of the base printer by observing the following:
1.
The LED comes on.
2.
The operator panel displays one and a half row of pels, and then clears.
3.
Diamonds scroll across the display, and then clear.
4.
The operator panel displays one and a half row of pels, and then clears.
5.
The top line of the operator panel displays one square block of pels that turn on one at a time
until all sixteen blocks display and then they all turn off.
For example:
6.
Performing Self Te
VW
appears on the display.
•
The high-capacity option elevator tray moves to the uppermost position if installed.
•
The duplex option is checked if installed.
7. %XV\
appears on the display.
If present, the following errors or messages may display:
•
Close Door or Insert Cartridge display if the upper front cover is open or the print cartridge
is missing.
•
Any cartridge errors, such as Defective Cartridge, Prebate Violation, or Missing Cartridge.
8.
The fuser lamp turns on. The fuser takes longer to warm up from a cold start than a warm start.
9.
The main fan turns on.
10.
The main drive motor turns on.
11.
The developer drive assembly drives the developer shaft in the toner cartridge.
12.
The exit rollers turn.
13.
The operator panel LED starts blinking.
14.
Ready appears on the display.
*
32MB
350 Mhz