Lexmark CX510 series Скачать руководство пользователя страница 273

Страница: 273 / 353

Remove the extra flash memory.

Connect the power cord to a properly grounded electrical outlet.

Turn the printer back on.

Too many trays attached [58]

Turn off the printer.

Unplug the power cord from the electrical outlet.

Remove the extra trays.

Connect the power cord to a properly grounded electrical outlet.

Turn the printer back on.

[Type] imaging kit low [84.xy]

Note:

The type can be a black imaging kit, or a black and color imaging kit.

You may need to replace the imaging kit. If necessary, touch

Continue

on the printer control panel to clear the message

and continue printing.

[Type] imaging kit nearly low [84.xy]

Note:

The type can be a black imaging kit, or a black and color imaging kit.

If necessary, touch

Continue

on the printer control panel to clear the message and continue printing.

[Type] imaging kit very low, [x] estimated pages remain [84.xy]

Note:

The type can be a black imaging kit, or a black and color imaging kit.

You may need to replace the imaging kit very soon. For more information, see the “Replacing supplies” section of the

User’s Guide

If necessary, touch

Continue

on the printer control panel to clear the message and continue printing.

Unformatted flash detected [53]

Try one or more of the following:

•

From the printer control panel, touch

Continue

to stop the defragmentation and continue printing.

•

Format the flash memory.

Note:

If the error message remains, then the flash memory may be defective and needs to be replaced.

Waste toner bottle nearly full [82.xy]

You may need to order a waste toner bottle. If necessary, touch

Continue

on the printer control panel to clear the

message and continue printing.

Troubleshooting

273

Содержание CX510 series


































































































































































































































































































































































Результаты поиска

Содержание CX510 series

Отзывы:

Похожие инструкции для CX510 series

Бренды по названию

Популярные бренды

Lexmark CX510 series, Руководство пользователя

Результаты поиска

Содержание CX510 series

Отзывы:

Похожие инструкции для CX510 series

Бренды по названию

Популярные бренды