Do not load bent or wrinkled print media.
7
Close the tray.
Make sure the tray is pushed completely into
the printer. Do not exceed the maximum stack
height. Overfilling the tray may cause paper
jams.
Loading the multipurpose feeder
1
Open the multipurpose feeder.
2
Squeeze the paper guide lever and slide the
guide all the way toward the front of the printer.
3
Flex the specialty media back and forth to
loosen the stack, and then fan the stack. Do not
fold or crease the media. Straighten the edges
of the stack on a level surface.
4
Arrange the stack of paper or specialty media
correctly for the size, type, and print method you
are using.
5
Place the paper or specialty media, print side
up, along the left side of the multipurpose
feeder, and then push it in as far as it will easily
go.
Do not force the media.
Note:
Do not exceed the maximum stack
height. Overfilling the feeder may
cause jams.
6
Squeeze the paper guide lever and slide the
guide until it lightly touches the side of the stack.
7
If you are loading a different type of media than
was previously loaded in the tray, change the
Paper Type setting for that tray on the operator
panel.
Setting the paper type and paper
size
1
Press
on the operator panel.
2
Press
until you see
Paper Menu
.
3
Press .
4
Press
until you see
Paper Size/
Type
.
5
Press .
6
Press
until you see
MP Feeder Size/
Type
.
7
Press .
8
Press
until the
appears next to the
media size you loaded.
9
Press .
10
Press
until you see
MP Feeder Size/
Type
.
11
Press .
12
Press
until
appears next to the media
type you loaded.
13
Press .
