Lexmark 7300 Series, Руководство по обслуживанию

Страница: 27 / 88

4418-X6X
Diagnostic information
2-7
120A Undefined
Error Microprocessor has
encountered an abort
or undefined
instruction. Unplug the
All-In-One; wait a few
seconds, then plug
the All-In-One back
in, and turn the power
on. If the error
remains, replace the
system board.
120B Address Error Firmware attempted to
access invalid address
space. Unplug the
All-In-One; wait a few
seconds, then plug
the All-In-One back
in, and turn the power
on. If the error
remains, replace the
system board.
120C NVRAM Error An error was detected
in reading or writing
NVRAM. Unplug the
All-In-One; wait a few
seconds, then plug
the All-In-One back
in, and turn the power
on. If the error
remains, replace the
system board.
120D Never Error Stack over and under
flow error; Code error Unplug the
All-In-One; wait a few
seconds, then plug
the All-In-One back
in, and turn the power
on. If the error
remains, replace the
system board.
120E Software
Detected Error An error condition was
detected in the
software control code. Unplug the
All-In-One; wait a few
seconds, then plug
the All-In-One back
in, and turn the power
on. If the error
remains, replace the
system board.
Code Name Description Action