Lexmark 7300 Series, Руководство по обслуживанию

Страница: 25 / 88

4418-X6X
Diagnostic information
2-5
1212 Watchdog Error Indicates printer
system was reset by
Watchdog timer;
Subsystem stall failure. Unplug the
All-In-One; wait five
minutes, then plug
the All-In-One back
in, and turn the power
on. If the error
remains, replace the
system board.
1213 Data Abort
Error Firmware attempted to
load or store to an
invalid address. Unplug the
All-In-One; wait a few
seconds, then plug
the All-In-One back
in, and turn the power
on. If the error
remains, replace the
system board.
1214 Invalid
Processor
Mode Error The ARM processor
was in an incorrect
mode to perform the
requested operation. Unplug the
All-In-One; wait a few
seconds, then plug
the All-In-One back
in, and turn the power
on. If the error
remains, replace the
system board.
1215 Math Error There is a problem
doing math, such as
dividing by zero. Unplug the
All-In-One; wait a few
seconds, then plug
the All-In-One back
in, and turn the power
on. If the error
remains, replace the
system board.
1216 Mailbox Error There is a problem
with the internal
mailbox messaging
system. Unplug the
All-In-One; wait a few
seconds, then plug
the All-In-One back
in, and turn the power
on. If the error
remains, replace the
system board.
1217 Temperature
Error There is a problem
determining
temperature. Replace the print
cartridge.
Code Name Description Action