Lexmark 4227-100, Руководство по обслуживанию

Страница: 45 / 134

Diagnostic Information 2-25
4227-100
POST Service Check
FRU Action
1 Power Disconnect the parallel or serial cable and turn
power on.
If there is no printer activity, go to the “Power
Failure Service Check” on page 2-26 .
2 Operator Panel If the power supply fan turns on but no LEDs
light, go to the
“Operator Panel Service Check”
on page 2-20 .
3 Main Logic Board If the Power LED turns on but POST does not
complete, replace the main logic board.
Readjust the “Bidirectional Print Adjustment”
on page 4-4 and check the
“Printhead-to-Platen Gap Adjustment” on page
4-2
.
4 Printer Cable If POST completes, reconnect the parallel or
serial cable and turn power on again.
If POST now fails, there is a problem with the
cable, or the parallel connector on the main
logic board.