3
Remove the imaging unit.
Warning—Potential Damage:
Do not expose the imaging
unit to direct light for more than 10 minutes. Extended
exposure to light may cause print quality problems.
Warning—Potential Damage:
Do not touch the
photoconductor drum. Doing so may affect the quality of
future print jobs.
4
Remove the jammed paper.
CAUTION—HOT SURFACE:
The inside of the printer
might be hot. To reduce the risk of injury from a hot
component, allow the surface to cool before touching
it.
Note:
Make sure that all paper fragments are removed.
5
Insert the imaging unit.
6
Close the front door, and then insert the tray.
7
Open the rear door.
CAUTION—HOT SURFACE:
The inside of the printer
might be hot. To reduce the risk of injury from a hot
component, allow the surface to cool before touching
it.
8
Remove the jammed paper.
Note:
Make sure that all paper fragments are removed.
9
Close the rear door.
10
Remove the optional tray.
11
Remove the jammed paper.
Note:
Make sure that all paper fragments are removed.
8
