1
2
3
1
3
2
Lift the paper
support and extend
the paper exit tray.
Load the paper.
Lower the paper feed guard,
squeeze the paper guide, and slide
it to the left edge of the paper.
Load paper
1
3
1
2
1
2
4
1
2
3
5
Press
to print
an alignment page.
You may discard the
alignment page after it
prints.
6
Open the
access cover.
Remove the sticker and tape from
the bottom of the print cartridges.
Open the cartridge lids, insert the cartridges,
and snap the cartridge lids closed.
Warning: Do not touch the copper
contact area on the back or the metal
print cartridge nozzles on the bottom.
If you are using your
printer with a
computer, continue
with “Install the
software”...
2
Reminder:
Save the print
cartridge storage unit to
protect new or partially used
cartridges.
Remove the photo
cartridge from the
print cartridge storage
unit.
www.lexmark.com
Safety information
• Use only the power supply provided with this product or the manufacturer's authorized
replacement power supply.
• Connect the power supply cord to an electrical outlet that is near the product and easily
accessible.
• Refer service or repairs, other than those described in the user documentation, to a professional
service person.
CAUTION: Do not set up this product or make any electrical or cabling connections, such as the
power supply or telephone, during a lightning storm.
~~~~~~~~~~~~~~~~~~~~~~
~~~~~~~~~~~~~~~~~~~~~
~~~~~~~~~~~~~~~~~~~~~
~~~~~~~~~~~~~~~
~~~~~~~~~~~~~~~
Note: Contents may vary.
Unpack your printer
1
*11X1111*
~~~~~~~~~~~~~~~~~~~~~~
~~~~~~~~~~~~~~~~~~~~~
~~~~~~~~~~~~~~~~~~~~~
~~~~~~~~~~~~~~~
~~~~~~~~~~~~~~~
?
?
?
?
?
?
http://support.lexmark.com/
910 Series
1
1
2
Prepare the printer
2
Connect the power
cord.
Make sure the Power
light is on.
2
3
2
1
Press + to scroll to
your language, and
then press
.
Install the print cartridges
4
Please save this sheet for future reference.
3
Close the
access cover.
