Lexicon PCM 91, Руководство пользователя

Страница: 51 / 163

2-29
Basic Operation
Creating a Soft Row
In Pro mode you still have complete access to the Soft Row, which appears
above row 0 of the full edit matrix. The parameters assigned here are duplicates
of selected parameters in the matrix and can be adjusted from Row S (Soft Row),
or from their matrix location.
The following example shows the edit matrix for the preset, P 0.0 Deep Blue
(Random Hall algorithm). As you can see, parameters from locations throughout
the matrix have been assigned to this Soft Row. In this preset (and in every
preset) we have designed the Soft Row by assigning the Mix control first,
followed by any Custom Controls, then the parameters in numerical order.
Parameters from the Controls row are assigned in order to the first locations,
followed by assignments from the Time row, and so on. As Soft Row parameters
are also labeled with the name of the row from which they were taken, this makes
it relatively easy to find the source parameter for any Soft Row assignment.
In the presets, the convention of assigning Custom Controls 1-4 to Soft Row
positions 1-4 allows you to identify the original control by its corresponding
number, even when a name has been assigned to it.
The Soft Row assigned to an effect appears
above Row 0 in the full Edit matrix.
We have highlighted those
parameters in the Edit matrix
which have been assigned to the
Soft Row of P 0.0 Deep Blue,
for example: Pre Delay, and
Control 1 (named StereoWidth
in the Soft Row).