MIDI Operation
Lexicon
5-4
Note:
When a MIDI controller is assigned to Tap, moving
it upward through the mid-point of its Learned
range will execute a "press" of the front panel
button. When a MIDI controller is assigned to the
Bypass or Compressor buttons, moving above or
below its mid-point will toggle the control on or off.
Some MIDI controllers do not allow repeated Program
Change messages to be sent with a single button. To
assist these controllers, the unit also recognizes the next
highest Program Change message with each Program
Change message it learns for Bypass and Tap. For
instance, if Program Change 20 is learned as the source
for Bypass, Program Change 21 will also control Bypass
functions. To avoid conflicting Bypass and Tap
assignments, leave a space between the assignments for
these two buttons.
CLEARING A LEARNED ASSIGNMENT
1. Press Store and Tap simultaneously to enter
Learn Mode. The Store and Tap LEDs will
light to indicate Learn Mode is active, and “lrn” will
appear on the display.
2. Select the desired front panel control to clear (for
example, Mix, Lvl/Bal, Adjust, or Bypass).
3. Press Store to clear the assignment. The Store button
will flash rapidly and “Clr” will appear on the display.
To clear another front panel assignment, repeat steps
2 and 3.
4. Simultaneously press Store and Tap to exit Learn
Mode. The Store button will flash rapidly if
assignments have been changed.
