Lexicon MC-4, Руководство пользователя

Страница: 62 / 164

SETUP
Lexicon
3-24
SPEAKER SETUP
Selecting the SETUP menu SPEAKERS option opens the SPEAKER SETUP, which can be used to configure the audio output connectors for the
desired speaker setup, set speaker distances and calibrate output levels. The MC-4 has eight audio output connectors labeled Front L/R,
Center, Subwoofer, Side L/R and Rear L/R.
SPEAKER SETUP SPEAKERS SETUP
CUSTOM SPEAKER SETUPS
Selecting the SPEAKER SETUP menu CUSTOM SETUP option opens
the CUSTOM SETUP menu, which can be used to configure the
audio output connectors for a custom speaker setup. The
CUSTOM SETUP menu allows the selection of independent
crossover points for each audio output connector.
Determining Crossover Points
The CUSTOM SETUP menu allows independent crossover points
to be assigned for each audio output connector. Crossover points
can be selected in 10Hz increments within a 30Hz–120Hz range.
With the exception of THX 80Hz, all crossover points activate a
24dB per-octave filter. The graphs on the next page indicate the
frequency response of these crossover points.
CUSTOM SETUP SPEAKERS SETUP
MAIN MENU
MODE ADJUST
AUDIO CONTROLS
SETUP
SETUP
SETUP
INPUTS
SPEAKERS
REAR PANEL CONFIG
DISPLAYS
VOLUME CONTROLS
TRIGGER
LOCK OPTIONS
SPEAKERS
SPEAKER SETUP
CUSTOM SETUP
THX SETUP
SPEAKER DISTANCES
LEVELS CALIBRATION
40Hz 40Hz
40Hz 60Hz 60Hz
60Hz 60Hz
60Hz
L
M
SUB
R
C
SL
SR
RL
RR
CUSTOM SETUP
CUSTOM SETUP
FRONT L/R 40Hz
CENTER 60Hz
SIDE L/R 60Hz
REAR L/R 60Hz
SUBWOOFER 40Hz
THX ULTRA2 SUB OFF
BGC N/A
ASA APART
The THX 80Hz crossover point activates a 12dB per-octave filter
for the audio output connectors labeled Front L/R, Center, Side
L/R and Rear L/R and a 24dB per-octave filter for the audio output
connector labeled Subwoofer.
For each audio output connector, select the crossover point closest
to the low-frequency rating of the associated loudspeaker. For the
output connector labeled Subwoofer, select the crossover point
equal to the lowest crossover point of the other loudspeakers.