manualshive.com logo in svg

Lexicon MC-4, Руководство пользователя

Поделиться
Скачать
Lexicon MC-4 Скачать руководство пользователя страница 23

Basic Operation

MC-4

2-5

88.2kHz and 96kHz), Dolby Digital and DTS(-ES) sources.
These connectors are not compatible with MPEG (MP3)
sources.

4. Analog Audio Input Connectors

Provide analog audio input. Eight stereo RCA connectors
labeled 1 through 8 are available. The connectors labeled 3, 4
and 5 and the connectors labeled 6, 7 and 8 can be
configured as 5.1-channel connectors. 

When a 5.1-channel analog audio source is present, input
signals are sent to the audio output connectors as indicated
in the table below.

Input Connector

Output Connector

(L)

Front L

(R)

Front R

(C)

Center

(SUB)

Subwoofer

(LS)

Side L and Rear L

(RS)

Side R and Rear R

5. Audio Output Connectors

Provide analog audio output. Eight RCA connectors labeled
Front L/R, Center, Subwoofer, Side L/R and Rear L/R are
available.

6. Video Input Connectors

Provide video input. Five composite video connectors labeled
Video 1 through 5, five S-video connectors labeled 1 through
5, and three component video connectors labeled INPUT 1
through 3 are available. 

7. Video Output Connectors

Provide video output. One composite video connector, one
S-video connector and one component video connector are
available.

Note:

•

Composite video output connectors are available
when a composite or S-video source is present.

•

S-video output connectors are available when
an S-video source is present.

•

Component video output connectors are avail-
able when a component video source is present.

8. IR IN Connector

Accepts input of IR signals from infrared distribution
equipment. One 3.5mm jack labeled IR IN is available. This
connector accepts a stereo plug (Tip/Ring ) or mono plug
(Tip/Sleeve ) connection.

Содержание MC-4





































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды