Lexicon MC-12 Balanced Скачать руководство пользователя страница 32

Страница: 32 / 94

Lexicon, Inc.
MC-12 Serial Communications Protocol

Printed on: 08/18/03

32 of 94

FALSE Indicates the MC-12 will not transmit parameter change Notifications.

7.3.32 Set Communication Configuration (MC-12, MC-1)

The Set Communication Configuration Command allows the serial port user to set up the various serial
port/ protocol configuration parameters.

7.3.32.1 Command Packet Description

Application Header:

Command

DC_CMD_SET_COM_CONFIG

0x30

Data Count

0x01

Application Data:

Data[0]

Configuration Register 0

7.3.32.2 Data Description

Data Word Bit Definition
0

Acknowledge Enable

Parameter Change Enable

Acknowledge Enable:

TRUE Indicates the MC-12 will transmit Acknowledge Notification’s to the Host.
FALSE Indicates the MC-12 will not transmit any positive Acknowledge Notification

messages. The MC-12 will always transmit NAK error notification messages.

Parameter Change Enable:

TRUE Indicates the MC-12 will transmit any parameter change Notification as

specified in the Parameter Change Notification Message.

FALSE Indicates the MC-12 will not transmit parameter change Notifications.

7.3.32.3 MC-12 Response

The data values transmitted will be copied over to the registers stored in nonvolatile RAM. The MC-12
will respond with an ACK Packet.

7.3.33 Set Mute (MC-12, MC-1)

The Set Mute Command message allows the RS232 users to set/clear the MC-12 mute state directly.

7.3.33.1 Command Packet Description

Application Header:

Command

DC_CMD_SET_MUTE

0x31

Data Count

0x01

Application Data:

Data[0]

Mute State

7.3.33.2 Data Description

Содержание MC-12 Balanced































































































Результаты поиска

Содержание MC-12 Balanced

Отзывы:

Похожие инструкции для MC-12 Balanced

Бренды по названию

Популярные бренды

Lexicon MC-12 Balanced, Руководство пользователя

Результаты поиска

Содержание MC-12 Balanced

Отзывы:

Похожие инструкции для MC-12 Balanced

Бренды по названию

Популярные бренды