Lexicon M300L, Руководство пользователя

Страница: 48 / 162

3-19
System Operation
-24 18 12 6 0 6 +12 ovld dB
L
R
-24 18 12 6 0 6 +12 ovld dB
L
R
The last two pages in any Effect Program or Register are always the MIDI Patch
Page, and the Naming Page. As these are identical in every algorithm, they are
not shown with the other effect parameters in Chapter 4. Both of these pages are
shown below for reference. The use of these pages is discussed elsewhere in
detail.
R SEL SRC DEST SCL THR VAL
SEL <L>ARGE HALL CHG
The 300L has 50 registers available to store edited versions of the preset effects.
After you have made the changes you want to an effect’s parameters, you can
store the changed version into an Effect Register by pressing STOre.The
following display will appear:
AVAILABLE
300MA: B01R1
The display will show the current bank and register location is available, in this
example, B01R1. Unless you choose another location, this is where the
modified effect will be stored. The message "STORED" will be displayed briefly
to indicate that the store operation was completed. To choose a different
location, for example, B01R5, press REG repeatedly until the display shows that
location, then press STOre.
If you wish to store the modified effect in Machine B press the MACH button. The
upper display will change so that the lower line reads: 300MB: B10P5. Press
STOre and the display will change again to show:
AVAILABLE
300MB: B01R2
If you press STOre again, the message "STORED" will be displayed briefly to
indicate that a store operation was successfully completed to this location.
When you store an effect, it still has the same name as the original effect. To
avoid confusion, you can assign names to registers. For convenience, a naming
page is included in Effect Edit mode. To rename a register, follow the same
procedure described for naming a Setup.
The MIDI Patch Page
and the Naming Page
Storing Individual
Effect Registers